Paste for High Conductive Steel Rod

Cold ramming paste is a paste specially developed for cathode carbon blocks of aluminum electrolytic cells. It is used to fill the large gaps around the cathode, the gaps between carbons, and to connect the cathode steel rod and the cathode carbon block.

This paste shows good high-temperature linear changes during the roasting process, and the linear shrinkage rate is less than 0.15%. During the cathode construction process, the temperature window is very wide and can adapt to the ambient temperature of 17-42 degrees. 

During construction, the carbon block does not need to be heated or sprayed with adhesive. The construction process is simple and the construction quality is easy to ensure.

Product specification

Technical Data

Item

Unit

Paste for High Conductivity  Steel Rod

Electric calcined coal (graphitization process 30-40%)

%

80-90

Binder

%

10-20

Unbaked Paste

Bulk density

kg/m3

1580

After at 950℃  firing

Heat loss after baking

%

    10

   Permanent linear change

%

   20℃-950℃   0.15

  Thermal Expension Coefficient

K

   950℃-20℃   4.5×10-6

  Bulk density

g/cm3

   1.42

  Apparent Porosity

%

    23

  Cold Crush strength

16-22

   14-20

  Resistivity

μΩm

    45

  Ash content

%

     5.50

  Thermal conductivity

  W/mK

    10

Shelf life under the condition in a shaded environment at 30°C

Month

     12

Optimum construction temperature

   ℃

     25

Related products

Get a quote

Please fill in the information you want to know in the form below, and we will contact you as soon as possible: