Monolithic refractories for hot metal mixer

      "Refractories for monolithic lining of hot metal mixer and installation technique" were developed independently by our company to replace the conventional brickwork to give good integrity, higher safety and good insulating effect. Consequently, the problem of roof brickwork collapse has been overcome and the service life of slag line and tap hole zone has been significantly improved. This achievement was approved as a science and technology achievement organized by Department of Science and Technology of Henan Province and granted national invention patent. The technology has been successfully applied in domestic hot metal mixers with capacities of 300, 600, 900 and 1300 tons, with service lives of 1 to 3 times that of the original brickwork linings.

      According to application and service conditions, we have developed mullite castables, mullite-zirconia castables, high alumina-silicon carbide castables and high alumina-mullite castables for roof, slag line, tap hole and bottom respectively. We can offer full service from lining design, refractory supply, installation to working out operation regulations, maintainance, etc.

产品规格

Properties specification of castables for hot metal mixer

 

 Type

 

SR-HA-1

 

SR-HA-2

 

SR-HA-3

 

SR-HL

 

SR-HH

Chemical analysis(%) ≥ 

Al2O3

72

65

60

60

70

 

Bulk density (g/cm3)   ≥

110℃×24h

2.70

2.70

2.70

2.30

2.60

1400℃×3h

2.60

2.60

2.60

2.20 (1350℃)

2.60 (1350℃)

Modulus of rupture Mpa

110℃×24h

4

5

5

5

6

1400℃×3h

8

6

6

6 (1350℃)

8 (1350℃)

Compressive strength Mpa ≥

110℃×24h

30

35

40

30

30

1400℃×3h

60

50

50

50 (1350℃)

50 (1350℃)

Permanent change (%)

1400℃×3h

±0.5

±0.5

±0.5

0+0.5

0+0.5

Application

 Slag line

Roof

 Hearth

相关产品